Velocity Edge GX440 User's Guide Page 70

  • Download
  • Add to my manuals
  • Print
  • Page
    / 412
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 69
ALEOS 4.3.4 Software Configuration User Guide
70 4114514
Figure 4-3: Hair-pinning in Public Mode
Tip: When using Public mode, Sierra Wireless recommends connecting the device directly
to the computer or other end device. Using a hub or switch may prevent the AirLink device
from updating the IP address of the end device when an IP address is received from the
cellular network.
In ACEmanager, the Host Public mode and DHCP settings are part of the LAN
tab. Subtabs of the LAN tab address the configuration of each interface or
network type.
DHCP/Addressing
This section is primarily a status display of the configurations, with a few options
that are global to all interface types. Interfaces that are enabled in the current
configuration are displayed with their configured settings.
DHCP addresses and subnets are assigned to the LAN side interfaces display. If
no Wi-Fi X-Card is installed in an AirLink GX Series device, select the DHCP/
Addressing section from the LAN tab to display a screen similar to the Figure 5-1
example.
Note: If the device has not been reset since configuration changes were made, the current
configuration in use may be different.
Internet
Router or laptop
Hair-pinning in Public Mode
Routable IP address
Traffic is routed from
the mobile network to routable IP
address on the router and then
“hair-pinned” back to the AirLink
device.
AirLink device
Non-routable
IP address
Page view 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 411 412

Comments to this Manuals

No comments