ALEOS 4.3.4 Software Configuration User Guide
148 4114514
Low Power Mode
(continued)
Time Delay
If you select Time Delay, the AirLink device monitors the ignition sense on the power
connector and enters the low power consumption stand-by mode when the ignition is
turned-off.
• Low Power Mode Delay (mins): The number of minutes after one of the Low Power
events happens until the AirLink device enters the low power mode. (max 255)
Low Power Mode
(continued)
Low Voltage
If you select Low Voltage, you need to set the Low Voltage Threshold.
• Low Voltage Threshold: Set the voltage level at which the device goes into low power
mode (threshold in tenths of volts), e.g. VLTG=130 would place the device in a low
power standby state if the voltage goes below 13.0V.
Accepted values are 80–360.
• Low Voltage Wakeup Delta (.1 volt): Sets the change in voltage used to wake up the
device from low power mode, e.g. set to 25 to wake up from low power mode when
the input voltage exceeds the low voltage threshold by 2.5 volts.
Field Description
Comments to this Manuals