ALEOS 4.3.4 Software Configuration User Guide
368 4114514
*DATZ Query or set the option to block device reset using ATZ.
AT*DATZ? to query
AT*DATZ=n to set
• n=0 — Off. Block is disabled—ATZ resets the device. (default)
• n=1 — On. Block is enabled—ATZ does not reset the device.
E Toggle AT command echo mode.
ATE? to query
ATEn to set
• n=0 — Echo Off; does not echo commands to the computer
• n=1 — Echo On; echoes commands to the computer (so you can see what you type)
Note: Do not use an equal sign (=) when issuing the command.
H ATH hangs up, immediately terminates the session (PAD or PPP).
HOR Half-Open Response — In UDP auto answer (half-open) mode.
AT*HOR? to query
AT*HOR=n to set
• n=0 — No response codes when UDP session is initiated
• n=1 — RING CONNECT response codes sent out serial link before the data from the
first UDP packet
Note: Quiet Mode must be Off.
Q Query or set AT quiet-mode. If quiet mode is set, there is no responses to AT commands
except for data queried.
ATQ? to query
ATQn to set
• n=0 — Off (Default)
• n=1 — Quiet-mode on
Note: Do not use an equal sign (=) when issuing the command.
Table D-11: Standard (Hayes) AT Commands (Continued)
Command Description
Comments to this Manuals