Rev 1 Oct.13 377
E
E: SMS Commands
SMS Command format
PW [Password] [Prefix][Command or Command parameter1]
[Command parameter2 (if applicable)] [Command parameter n]
Note: There is no space between the prefix and the command (or the 1st
command parameter in the case of multi-parameter commands). There must
be a single space between all other fields to act as a delimiter.
The default password is the last 4 digits of the SIM ID number (for
SIM-based devices) and the last 4 digits of the ESN (for non-SIM
devices). If you do not know the SIM ID or ESN number, you can find
it in ACEmanager on the Status > WAN/Cellular page.
The default prefix is “&&&”.
Whether or not a password and prefix are required varies depending
on the SMS mode selected in ACEmanager.
When an SMS command is received, the AirLink device performs the
action requested and sends a response back to the phone number
from which it received the SMS.
For more examples and detailed instructions, see SMS on page 157.
SMS mode Password
(configurable in all modes)
Prefix
Password Only Always required Required
Use default (not configurable)
Control Only Required when sending from a
non-trusted phone number
Prefix is configurable.
The prefix can be omitted if the ALEOS
Command Prefix field in ACEmanager
(Services > SMS) is configured to be blank.
Gateway Only Always required Required
Use default (not configurable)
Control and Gateway Required when sending from a
non-trusted phone number
Required
Configurable, but cannot be blank
Comments to this Manuals