Rev 1 Oct.13 357
*PPLATSR Query or set the GPS report type that is sent to the local client (Ethernet, USB/net, or PPP).
AT*PPLATSR? to query
AT*PPLATSR=n to set
RAP reports:
• n=11—GPS Data
• n=12—GPS + Date
• n=13—GPS + UTC + RF
• n=14—GPS + Date + RF + EIO
NMEA reports:
• n=E0—NMEA GGA + VTG
• n=E1—NMEA GGA + VTG + RMC
• n=E2—NMEA GGA + VTG + RMC + GSA + GSV
TAIP reports:
• n=F0 —TAIP data—TAIP GPS report that contains position and velocity
• n=F1 —TAIP GPS report that contains the compact position
• n=F2—TAIP LN report—TAIP GPS report that contains a long navigation message
• n=F3—TAIP TM report—TAIP GPS report that contains the time and date
*PPMAXRETRIES
*PP2MAXRETRIES
*PP3MAXRETRIES
*PP4MAXRETRIES
Query or set maximum number retries when in Simple Reliable mode, UDP Sequence
mode, and TCP transports.
AT*PP[Server number if other than server 1]MAXRETRIES? to query
AT*PP[Server number if other than server 1]MAXRETRIES=n to set
• n=0—Disabled
• n=1–255 retries (Maximum is 10.)
*PPMINTIME
*PP2MINTIME
*PP3MINTIME
*PP4MINTIME
Query or set the minimum amount of time between report packets. Each packet can contain
multiple reports. This is useful to limit network traffic and make more efficient use of
bandwidth. You can also use it in conjunction with store and forward. The minimum value
depends on the policies of the Mobile Network Operator.
AT*PP[Server number if other than server 1]MINTIME? to query
AT*PP[Server number if other than server 1]MINTIME=n to set
• n=0—Disable
• n=1–65535 seconds
*PPODOM
*PP2ODOM
*PP3ODOM
*PP4ODOM
Query or set including the current odometer reading in the RAP report.
AT*PP[Server number if other than server 1]ODOM? to query
AT*PP[Server number if other than server 1]ODOM=n to set
• n=0—Disabled (default) Do not include odometer reading in report.
• n=1—Enabled Include odometer reading in report.
*PPODOMVAL Query or set the odometer value (in meters). Maximum value is approximately 4.3 billion
meters (2.7 million miles).
AT*PPODOMVAL? to query
AT*PPODOMVAL=n to set
• n=0–4294967295 meters
Table D-9: GPS AT Commands (Continued)
Command Description
Comments to this Manuals