ALEOS 4.3.4 Software Configuration User Guide
334 4114514
LAN/WiFi
LAN
Note: A reboot is required before these commands take effect.
*SIMPINENABLE HSPA and LTE fallback to HSPA only
Query or set the SIM pin.
AT*SIMPINENABLE? to query
AT*SIMPINENABLE=n to set
• n=0—Don’t change
• n=1—Enable (SIM pin required on startup)
• n=2—Disable
*TRAFWUPTOUT HSPA only
Query or set the timeout period after which, if there is no outgoing WAN traffic the
connection is terminated.
The timeout period only takes effect if *RADIO_CONNECT or *RADIO_CONNECT_
STARTUP is set to 1, or Always on connection is disabled in ACEmanager. (See Always on
connection on page 110.)
AT*TRAFWUPTOUT? to query
AT*TRAFWUPTOUT=n to set
• n=2–65535 minutes (default is 2)
Note: This timer is reset to zero each time a WAN packet goes out.
Table D-3: WAN/Cellular AT Commands
Command Description
Table D-4: LAN AT Commands
Command Description
*DHCPHOSTEND Query or set the ending IP address for the Ethernet DHCP pool
AT*DHCPHOSTEND? to query
AT*DHCPHOSTEND=d.d.d.d to set
• d.d.d.d=last IP address in Ethernet DHCP pool
*DHCPNETMASK Query or set the Ethernet DHCP subnet mask
AT*DHCPNETMASK? to query
AT*DHCPNETMASK=d.d.d.d to set
• d.d.d.d=Ethernet DHCP subnet mask
*DHCPSERVER Query or set the Ethernet DHCP server.
AT*DHCPSERVER? to query
AT*DHCPSERVER=n to enable or disable the DHCP server mode
• n=0—Disable
• n=1—Enable
Comments to this Manuals