Velocity Edge GX440 User's Guide Page 49

  • Download
  • Add to my manuals
  • Print
  • Page
    / 249
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 48
Rev 2.3 Feb.12 49
5
5: LAN Configuration
DHCP/Addressing
Ethernet
USB
Host Port Routing
Global DNS
PPPOE
VLAN
VRRP
The LAN tab that displays in ACEmanager is applicable across all
Sierra Wireless AirLink devices.
The primary purpose of the AirLink device is to route data from one
or more devices connected to one or more of the ports to the cellular
network and, ultimately, under most circumstances, to the Internet.
Public and Private Mode
To support some legacy installations, the AirLink device can act as a
one-to-one gateway giving the cellular network granted IP address
directly to a connected device. This is Public mode.
Since the one-to-one gateway configuration will not allow the
flexibility of a LAN environment where several devices can connect to
the AirLink device, Private Mode provides a NAT environment with an
optional DHCP server.
Tip: When using Public mode, Sierra Wireless recommends connecting the
device directly to the computer or other end device. Using a hub or switch
may prevent the AirLink device from updating the IP address of the end
device when an IP address is received from the cellular network.
In ACEmanager, the Host Public mode and DHCP settings are part of
the LAN tab. Subtabs of the LAN tab address the configuration of
each interface or network type.
Page view 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 248 249

Comments to this Manuals

No comments