Rev 2.3 Feb.12 225
*OPRG Enables/disables over-the-air firmware upgrading of the MP. When Sierra
Wireless releases a new version of ALEOS, you can upgrade your remote
devices with OPRG enabled.
• n=0 : Disables
• n=1 : Enables
*DPORT The device's Device Port which the device is listening on for inbound packets/
data/polls. Can also be set with the command S110.
• n=1-65535
*NETUID Network User ID
The login that is used to login to the cellular network, when required.
• uid=user id (up to 64 bytes)
*NETPW Network Password
The password that is used to login to the cellular network, when required.
• pw=password (30 characters maximum)
S53 This AT Command applies to:
• Destination Address
• Destination Port
• Default Dial Code
Destination IP address, port, and method. These are used as defaults for the
D (Dial) AT command.
• method= P : UDP
• method=T : TCP
• method=N : Telnet
• d.d.d.d=IP address or domain name
• ppppp=the port address
Examples:
ATS53=T192.168.100.23/12345
ATS53=foo.earlink.com
Telnet to the specified IP at port 12345.
ATS53=192.168.100.23/12345
Query the specified IP at port 12345.
ATS53=/12345
Query port 12345.
*NETALLOWZEROIP Allow Last Byte of net IP = Zero
Allows the displayed IP address in *NETIP to end in zero (ex. 192.168.1.0).
• n=0 : Do not allow.
• n=1 : Allow.
Table E-5: Common: Misc (Continued)
Comments to this Manuals