Rev 2.3 Feb.12 161
13
13: I/O Configuration
The I/O tab that displays in ACEmanager is applicable across all
Sierra Wireless AirLink devices which feature I/O ports.
This group includes configuration commands for the digital inputs and
outputs as applicable to an AirLink device. Some of the values shown
as a part of this group are not changeable but reflect the current
status. Only those devices with available inputs and outputs will
display this group.
Refer to the Inputs, Relay Outputs, and Power Status chapter in the
respective Hardware Users Guide for more information on the basic
features of the I/O settings.
Note: The I/O configuration options and displayed status of the I/O depends
on the AirLink device.
Current State
The current state screen will show the current values for the available
inputs as well as the current values for pulse counts (digital). The
current state of the Relay or Digital Output is displayed and can be
changed directly.
Figure 13-1: ACEmanager: I/0 - Current state
Table 13-1: I/O: Current State
Command Description
Digital Input 1 value Query Digital Input 1. The digital input reports either a 0 (open) or 1 (closed).
• n= 1 Input number
Pulse Count 1 On devices with a digital input that can be configured for use as a digital output,
the pulse counts will also reflect output changes.
Relay Output 1 Configure Relay Output 1 signal. Options:
• OFF
• Drive Active Low
Comments to this Manuals