Velocity Edge GX440 Specifications download pdf (Page 35)

Command Reference

Rev 3.2 Oct.05 33

!MPAINCFG=

<chan>,"<input

label>

", "<unit

label>

",<zero

scale>,<full scale>

!MPAINCFG?=

<chan>

Analog input channel configuration

Sets the labels and the scale for the specified input channel.

Parameter settings

The supported values are:

• Channel <chan>=

1 Analog input 1

2 Analog input 2

3 Analog input 3

4 Analog input 4

• Sensor or gauge description <input label>=

20 character string

• Name of units <unit label>=

20 character string

• Minimum value <zero scale>=

0 to 65535 (Must be less than <full scale>)

• Maximum value <full scale>=

0 to 65535 (Must be greater than <zero scale>)

!MPAINCFG? returns the configuration parameter values for the specified

channel.

!MPAUTHPPP=<n>

!MPAUTHPPP?

Enable / disable PPP authentication between the modem and the host PC

This command is only available on modems with firmware version 2.0 or

greater.

Controls whether PPP authentication is used in the modem-to-host PC link.

(This command has no effect on the link between the MP and the embedded

AirCard, over which PPP authentication is always used.)

The <n> parameter has these settings:

• <n>=1 Enables PPP authentication

• <n>=0 Disables PPP authentication between the modem and the host PC

(default)

Disabling PPP authentication allows you to use a single dial-up PPP connection

on multiple modems with different GPRS profiles.

!MPAUTHPPP? returns the current setting.

Table 3-9: Command Reference Table (ASCII Alphabetic)

Command Description

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 117 118

Comments to this Manuals

No comments

Velocity Edge GX440 Specifications Page 35

Comments to this Manuals

Related products and manuals for PC/workstation barebones Velocity Edge GX440